APS Supply Company has been serving the construction industry since 1980. APS Supply Company started as a construction equipment and supply company specializing in concrete and masonry accessories. The operation was expanded in 1984 when we began manufacturing expansion joints and related products for the concrete and masonry industry.
APS Supply Company sells products such as concrete expansion joints self expanding cork joint fillers fiber expansion joint closed cell poly foam rubber expansion joints closed cell neoprene standard cork self expanding cork fiber board homex bearing pads aps cork concrete expansion joints sponge rubber sponge rubber expansion joint neoprene bearing pads.
DESCRIPTION
Cork Expansion Joint Filler is preformed from clean, granulated cork particles, bonded together with an insoluble phenolic resin and molded under heat and pressure. The resultant material is strong, light in weight, flexible, acid-resistant and waterproof. Cork will not extrude when compressed up to 50 percent of its original thickness, and regains up to 95 percent as joint expansion takes place.
USE
Cork Expansion Joint Filler is used for all types of concrete construction
where the filler must be compatible with polymer-base sealants. Cork is widely
used in commercial and industrial construction.
ADVANTAGES
Light in color.
Can be compressed without extrusion.
Recovers to approximately 95% of original thickness after compression.
Compatible with polymer-base joint sealants.
CONFORMANCE
ASTM D1752, Type II
AASHTO M153, Type II
APS currently has state approvals in most states for many of our manufactured products. Our products have been sold in every state in the country and we have well over 100 distributors nationwide.
CONCRETE EXPANSION JOINTS
Product
No. Product
Name FED SPEC Specification
ASTM Sizes Description
310 FIBER EXPANSION JOINT HHF-341F
Type I
AASHTO M213
FAA Item P-610-2.7
Corps of Engineers
CRD-C-508 D-1751 Width: 2" - 48"
Thickness: 1/4", 3/8", 1/2", 3/4",1"
Length: 5', 10', 12' American made. Can be used for a wide variety of concrete
construction projects such as highways, driveways, sidewalks or anywhere any
expansion joint is required. Should be sealed with a hount sealant to protect
it form weathering.
320 ASPHALT EXPANSION JOINT HHF-341F
Type III
D-994 Width: 2" - 36"
Thickness: 1/4", 1/2", 3/8", 1/2", 3/4",1"
Length: 5', 10' Composed of asphalt, vegetable fibers and mineral fillers;
formed under heat and pressure between two asphalt asturated felt liners.
Economical, waterproof, permanent, flexible and self sealing. Ideal for sidewalks,
driveways and multi-level floors.
330* FOAM EXPANSION JOINT N/A N/A Width: 2" - 48"
Thickness: 1/4", 3/8", 1/2", 3/4",1"
Length: 5', 10' Provides an excellent joint filler and back up material for
use in either horizontal or vertical applications where expansion and contraction
movements must be accommodated. Should be sealed with a joint sealant to protect
it from weathering.
*MSDS Sheet for this product currently unavailable.
We also do some exporting as well as importing. Our building with office and warehouse facilites and 3.5 acres of ground was purchased in 1986. Please use the product catalog to search through all of the items APS Supply Company carries, and use the APS Cork menu to view specifications of products manufactured by APS Cork.
DESCRIPTION
A.P.S. Fiber Board is composed of asphalt impregnated fibers that are bonded together to produce a compressible, resilient, non-extruding concrete expansion Joint filler. It is readily compressible and will recover to more than 75% of its original thickness.
USE
A.P.S. Fiber Board is an ideal expansion Joint in highways, pavements, runways, sidewalks, and in all concrete or block structures. While offering excellent non-extrusion and recovery properties, A.P.S. Fiber Board should be protected from water infiltration and weathering with a suitable joint sealant.
APPLICATION
A.P.S. Fiber Board should be installed against the forms or other abutting
structures, as detailed on the plans, before placing concrete. The filler
should be installed 1/2" below the concrete surface and sealed with a
high quality joint sealing compound to protect from water infiltration and
weathering. However, a backer rod or bond breaker tape should be installed
over the joint filler to prevent the sealant from bonding to the filler.
SIZE/PACKAGING PER SKID
Width Thickness
3/8" 1/2" 3/4" 1"
3" 16000' 12000' 8000' 6400'
4" 12000' 9000' 6000' 4800'
5" 9000' 6750' 4500' 3600'
6" 8000' 6000' 4000' 3200'
8" 6000' 4500' 3000' 2400'
12" 4000' 3000' 2000' 1600'
4' x 10' Sheets (100) (75) (50) (40)
CONFORMANCE
ASTM D1751
DESCRIPTION
A.P.S. Closed Cell Poly Foam is an expanded polyethelene, flexible foam expansion joint filler available in white or black. It is highly resistant to most solvents and chemicals. A.P.S. Closed Cell Poly Foam is light in weight and easy to use on the jobsite.
USE
A.P.S. Closed Cell Poly Foam can be used in any application requiring an
expansion joint in concrete or masonry. Because of its flexibility, Closed
Cell Poly Foam can easily be wrapped around columns as an isolation joint.
A.P.S. Closed Cell Poly Foam makes an excellent sealant back-up material and
cuts easily to size on the jobsite with a utility knife.
Available with tear-off strip.
PACKAGING
Thickness: 3/8", 1/2", 3/4", 1", - UP
. .
Rolls: 3/8" x 48" x 200'
. 1/2" x 48" x 150'
Sheets: 3/4" x 48" x 108"
1" x 48" x 108"
Cut Material: Any width 2" - 48"
AVAILABILITY
Comprehensive stocks are carried at all times assuring shipment, in most cases, within 24 hours of receipt of order. TYPICAL PHYSICAL PROPERTIES
PHYSICAL PROPERTIES TEST METHOD ROLLS SHEETS
1.7 PCF 2.2 PCF
COMPREHENSIVE STRENGTH
VERTICAL DIRECTION ASTM D3575 SUFFIX D AT 25% 5.5 PSI 12.0 PSI
COMPRESSION SET
COMPRESSION CREEP ASTM D3575 TEST A 19.8% 13.2%
COMPRESSION CREEP ASTM D3575 TEST - BB 1000 HR @ 3.0 PSI <5% <7%
TENSILE STRENGTH PSI ASTM D3575 SUFFIX T 40 PSI 35 PSI
TEAR RESISTANCE ASTM D3575 SUFFIX G 12 LB/IN 8.5 LB/IN
DENSITY RANGE ASTM D3575 1.6-1.9 2.1-2.6
CELL SIZE (MM) ASTM D3576 (MODIFIED) 1.6 1.7
BOUYANCY (PCF) ASTM D3575 SUFFIX AA 59 58
THERMAL CONDUCTIVITY
(BTU-IN/HrFt^2 *F) ASTM C518-85 .29 .31
THERMAL RESISTANCE
(HR/FT^2 *F/BTU/IN) ASTM C518-85 3.05 3.05
SPECIFICATION
A.P.S. Closed Cell Poly Foam meets the requirements of A.S.T.M. D1752, Sections
3.1 through 3.4 with compression requirements modified.
|
|
|